Steel structure shot blasting machine is a kind of roller table through shot blasting machine, which is used to clean the surface of steel plates, plates, H-shaped steel, steel structures and other steel products. It can also clean the rust layer on some workpieces and show adhesion. When the steel structure shot blasting machine is working, the workpiece is sent to the cleaning room by the input roller table. The workpiece is shot by the shot blasting machine from all directions in the cleaning room, so that the rust, oxide skin and other dirt on the workpiece can fall off quickly, and a certain sense of luster can be generated on the workpiece surface. After cleaning, the workpiece is sent out by the output roller table, and the mixture scattered by the steel structure shot blasting machine in the working process is transported to the chamber funnel, The vertical and horizontal screw conveyors are gathered at the lower part of the elevator and then lifted into the separator of the machine.

Steel structure shot blasting machine is easy to produce dust in shot blasting cleaning. The purified gas after purification is discharged into the atmosphere, and the granular dust is captured and collected, which will not cause environmental pollution. The steel structure shot blasting machine has high working efficiency, good quality, stable operation equipment and stable operation. It can meet the finishing needs of different frequency and workpiece thickness, and can save a certain amount of manpower and physical strength.